|
| CS3 write speed |
 |
Thu, 1 May 2008 18:45:17 -0700 |
Greetings,
I have been using cs3 and vista64 home premium now for awhile with few to no
problems. I just purchased a replacement external dvd burner (LG 20X) for my
failing plextor 16x.
When using my replaced plextor, I believe it burned at the max speed but only
displayed "8X" in the speed indicator box. My internal writer speed is
displayed correctly at 6x (I think, I have not checked for sure.)
|
| Post Reply
|
| Re: CS3 write speed |
 |
Fri, 2 May 2008 18:54:43 -0700 |
Greetings,
Update on this "write speed" issue. It just started working on its
own. The max speed is displayed with accessable lower speeds.
|
| Post Reply
|
| Re: CS3 write speed |
 |
Sat, 3 May 2008 07:20:41 -0700 |
Dennis.
Good it's working right.
Burn speed is dictated by 2 factors - the drive & the media.
You can usually not set any burn speeds at all unless blank media is loaded, and
you may not see all the options you think you should - especially if the media
is not rated for the burner.
|
| Post Reply
|
| Re: CS3 write speed |
 |
Sat, 3 May 2008 07:43:30 -0700 |
Neil,
Thanks for the reply. I do use 16x TY printable disks. The LG20 states it
writes 20x to 16x disks. I don't recall seeing any actual 20x printable TY
disks.
|
| Post Reply
|
|
|
|
|
|
|
|
|
|