Re: Image Editing Software Opinions, Please

Bob, 


do you have Draw?

If so it becomes simple. if a kludge. Use PPaint, (I prefer Pshop, but paint
will work) convert the image to grey, push the should-be solid color to solid
black. convert to 1-bit bitmap at 600 or 1200 dpi (depends on quality or
original), 50% threshold (over 50 it goes solpid, under it goes white) It is
more complex if there are screens of the color, but it can still be done by
different route.

crop as required and save as filename-k. then reopen  and erase everything that
is color 2 then save as cfilename color 1. reopen black, erase color 1 and save
as file coor 2.

bring 1 into Draw. apply line color to spot #1, set fill to none. bring in 2,
set line to spot 2, fill to none. select both, align center H and V. group. you
have a two spot CDR file that will separate correctly. manage to get it into V10
and fly. DO NOT export iot as a bitmap--you will loose the spots.



Powered by the E-mail PIM - Info Select - www.miclog.com