Exchange 2003 LOG errors

Just installed DPM 2007, I had been running the BETA for over a year.  I have 
all my servers backing up except Exchange 2003.  Here is the details of the 
error in the job monitor:

The replica of Storage group First Storage Group on ex4.ksoma.hsc.usc.edu is 
inconsistent with the protected data source. All protection activities for 
data source will fail until the replica is synchronized with consistency 
check. You can recover data from existing recovery points, but new recovery 
points cannot be created until the replica is consistent (ID 3106)

Now the recommended action is to copy the esutil.exe and ese.dll to 
C:\Program Files\Microsoft DPM\DPM\bin

I have done this, and I have used those two files either the live ones in 
the Exchange BIN directory, I have also copied those two files from the 
install CD, and also the files from the install CD with service pack 2.  

None of these solutions solved anything.  Can someone please help me and 
tell me what I need to do to get the DPM back to proteting my Exchange server.

Thank you in advance.


-- 
Andy Quiroz mcsa mcse
System Engineer III
University of Southern California
Keck School of Medicine
Information Systems
andy.quiroz@keck.usc.edu

Here is the alert details entry:

Affected area:	First Storage Group
Occurred since:	4/9/2008 7:02:53 PM
Description:	The replica of Storage group First Storage Group on 
ex4.ksoma.hsc.usc.edu is inconsistent with the protected data source. All 
protection activities for data source will fail until the replica is 
synchronized with consistency check. You can recover data from existing 
recovery points, but new recovery points cannot be created until the replica 
is consistent (ID 3106)

Data consistency verification check failed for LOGS of Storage group First 
Storage Group on ex4.ksoma.hsc.usc.edu. (ID 30146 Details: Unknown error 
(0xfffffc01) (0xFFFFFC01))

Recommended action:	
Either the database files are corrupt or the proper versions of the 
following files are missing.
If you have recently upgraded your Exchange server, please copy them from 
that server to DPM server.

eseutil.exe
ese.dll

Please contact the administrator for Exchange server, and verify the issue. 
You can recover the last known good backup to address the corrupted state.
Synchronize with consistency check.
Run a synchronization job with consistency check...

Resolution:
To dismiss the alert, click below
Inactivate alert

*I think I have read a post of something simular before but I could not find 
it so I apoligize for a double post here.  Also please note I did change out 
the two files as stated with no sucess.  When I run the consistency check, it 
does run for a few hours, collecting all the data, it seems to fail when it 
runs the LOG portion of the consistency check...I think.

-- 
Andy Quiroz mcsa mcse
System Engineer III
University of Southern California
Keck School of Medicine
Information Systems
andy.quiroz@keck.usc.edu
http://www.usc.edu/kecktech


"Madhan S[MSFT]" wrote:

> Can you post the details of the Alert corresponding to this issue?
> 
> -- 
> Thanks
> Madhan S
> 
> This posting is provided "AS IS" with no warranties, and confers
no rights
> "Andy Quiroz" <andy.quiroz@keck.usc.edu> wrote in message 
> news:D992DCEE-441E-4AA3-8654-52BAC0E8AD30@microsoft.com...
> > Just installed DPM 2007, I had been running the BETA for over a year. 
I 
> > have
> > all my servers backing up except Exchange 2003.  Here is the details
of 
> > the
> > error in the job monitor:
> >
> > The replica of Storage group First Storage Group on
ex4.ksoma.hsc.usc.edu 
> > is
> > inconsistent with the protected data source. All protection activities
for
> > data source will fail until the replica is synchronized with
consistency
> > check. You can recover data from existing recovery points, but new 
> > recovery
> > points cannot be created until the replica is consistent (ID 3106)
> >
> > Now the recommended action is to copy the esutil.exe and ese.dll to
> > C:\Program Files\Microsoft DPM\DPM\bin
> >
> > I have done this, and I have used those two files either the live ones
in
> > the Exchange BIN directory, I have also copied those two files from
the
> > install CD, and also the files from the install CD with service pack
2.
> >
> > None of these solutions solved anything.  Can someone please help me
and
> > tell me what I need to do to get the DPM back to proteting my Exchange

> > server.
> >
> > Thank you in advance.
> >
> >
> > -- 
> > Andy Quiroz mcsa mcse
> > System Engineer III
> > University of Southern California
> > Keck School of Medicine
> > Information Systems
> > andy.quiroz@keck.usc.edu
> > http://www.usc.edu/kecktech 
> 
> 

fffffc01 is Jet_errInvalidPath, otherwise known as -1023.  From 
http://support.microsoft.com/kb/244525/en-us, the files required to run 
eseutil on another computer are  Eseutil.exe, Ese.dll, Jcb.dll, Exosal.dll, 
and Exchmem.dll .    You might want to try copying all of them if you 
believe the path to the esutil files isn't working.  Also verify the log and 
database paths for the copy to be verified.

John




"Andy Quiroz" <andy.quiroz@keck.usc.edu> wrote in message 
news:D992DCEE-441E-4AA3-8654-52BAC0E8AD30@microsoft.com...
> Just installed DPM 2007, I had been running the BETA for over a year.  I 
> have
> all my servers backing up except Exchange 2003.  Here is the details of 
> the
> error in the job monitor:
>
> The replica of Storage group First Storage Group on ex4.ksoma.hsc.usc.edu 
> is
> inconsistent with the protected data source. All protection activities for
> data source will fail until the replica is synchronized with consistency
> check. You can recover data from existing recovery points, but new 
> recovery
> points cannot be created until the replica is consistent (ID 3106)
>
> Now the recommended action is to copy the esutil.exe and ese.dll to
> C:\Program Files\Microsoft DPM\DPM\bin
>
> I have done this, and I have used those two files either the live ones in
> the Exchange BIN directory, I have also copied those two files from the
> install CD, and also the files from the install CD with service pack 2.
>
> None of these solutions solved anything.  Can someone please help me and
> tell me what I need to do to get the DPM back to proteting my Exchange 
> server.
>
> Thank you in advance.
>
>
> -- 
> Andy Quiroz mcsa mcse
> System Engineer III
> University of Southern California
> Keck School of Medicine
> Information Systems
> andy.quiroz@keck.usc.edu
> http://www.usc.edu/kecktech 

Can you post the details of the Alert corresponding to this issue?

-- 
Thanks
Madhan S

This posting is provided "AS IS" with no warranties, and confers no
rights
"Andy Quiroz" <andy.quiroz@keck.usc.edu> wrote in message 
news:D992DCEE-441E-4AA3-8654-52BAC0E8AD30@microsoft.com...
> Just installed DPM 2007, I had been running the BETA for over a year.  I 
> have
> all my servers backing up except Exchange 2003.  Here is the details of 
> the
> error in the job monitor:
>
> The replica of Storage group First Storage Group on ex4.ksoma.hsc.usc.edu 
> is
> inconsistent with the protected data source. All protection activities for
> data source will fail until the replica is synchronized with consistency
> check. You can recover data from existing recovery points, but new 
> recovery
> points cannot be created until the replica is consistent (ID 3106)
>
> Now the recommended action is to copy the esutil.exe and ese.dll to
> C:\Program Files\Microsoft DPM\DPM\bin
>
> I have done this, and I have used those two files either the live ones in
> the Exchange BIN directory, I have also copied those two files from the
> install CD, and also the files from the install CD with service pack 2.
>
> None of these solutions solved anything.  Can someone please help me and
> tell me what I need to do to get the DPM back to proteting my Exchange 
> server.
>
> Thank you in advance.
>
>
> -- 
> Andy Quiroz mcsa mcse
> System Engineer III
> University of Southern California
> Keck School of Medicine
> Information Systems
> andy.quiroz@keck.usc.edu
> http://www.usc.edu/kecktech 

Hi Andy,

    Please provide details about the OS running on the DPM and protected 
Exchange Server.

   Are they both 32/64 bit?

Thanks,
Kanishka - MSFT

This posting is provided "AS IS" with no warranties, and confers no
rights

"Andy Quiroz" <andy.quiroz@keck.usc.edu> wrote in message 
news:53C45B06-E6D3-46F3-AC08-A65A68C32931@microsoft.com...
> Here is the alert details entry:
>
> Affected area: First Storage Group
> Occurred since: 4/9/2008 7:02:53 PM
> Description: The replica of Storage group First Storage Group on
> ex4.ksoma.hsc.usc.edu is inconsistent with the protected data source. All
> protection activities for data source will fail until the replica is
> synchronized with consistency check. You can recover data from existing
> recovery points, but new recovery points cannot be created until the 
> replica
> is consistent (ID 3106)
>
> Data consistency verification check failed for LOGS of Storage group First
> Storage Group on ex4.ksoma.hsc.usc.edu. (ID 30146 Details: Unknown error
> (0xfffffc01) (0xFFFFFC01))
>
> Recommended action:
> Either the database files are corrupt or the proper versions of the
> following files are missing.
> If you have recently upgraded your Exchange server, please copy them from
> that server to DPM server.
>
> eseutil.exe
> ese.dll
>
> Please contact the administrator for Exchange server, and verify the 
> issue.
> You can recover the last known good backup to address the corrupted state.
> Synchronize with consistency check.
> Run a synchronization job with consistency check...
>
> Resolution:
> To dismiss the alert, click below
> Inactivate alert
>
> *I think I have read a post of something simular before but I could not 
> find
> it so I apoligize for a double post here.  Also please note I did change 
> out
> the two files as stated with no sucess.  When I run the consistency check,

> it
> does run for a few hours, collecting all the data, it seems to fail when 
> it
> runs the LOG portion of the consistency check...I think.
>
> -- 
> Andy Quiroz mcsa mcse
> System Engineer III
> University of Southern California
> Keck School of Medicine
> Information Systems
> andy.quiroz@keck.usc.edu
> http://www.usc.edu/kecktech
>
>
> "Madhan S[MSFT]" wrote:
>
>> Can you post the details of the Alert corresponding to this issue?
>>
>> -- 
>> Thanks
>> Madhan S
>>
>> This posting is provided "AS IS" with no warranties, and
confers no 
>> rights
>> "Andy Quiroz" <andy.quiroz@keck.usc.edu> wrote in
message
>> news:D992DCEE-441E-4AA3-8654-52BAC0E8AD30@microsoft.com...
>> > Just installed DPM 2007, I had been running the BETA for over a
year. 
>> > I
>> > have
>> > all my servers backing up except Exchange 2003.  Here is the
details of
>> > the
>> > error in the job monitor:
>> >
>> > The replica of Storage group First Storage Group on 
>> > ex4.ksoma.hsc.usc.edu
>> > is
>> > inconsistent with the protected data source. All protection
activities 
>> > for
>> > data source will fail until the replica is synchronized with 
>> > consistency
>> > check. You can recover data from existing recovery points, but
new
>> > recovery
>> > points cannot be created until the replica is consistent (ID
3106)
>> >
>> > Now the recommended action is to copy the esutil.exe and ese.dll
to
>> > C:\Program Files\Microsoft DPM\DPM\bin
>> >
>> > I have done this, and I have used those two files either the live
ones 
>> > in
>> > the Exchange BIN directory, I have also copied those two files
from the
>> > install CD, and also the files from the install CD with service
pack 2.
>> >
>> > None of these solutions solved anything.  Can someone please help
me 
>> > and
>> > tell me what I need to do to get the DPM back to proteting my
Exchange
>> > server.
>> >
>> > Thank you in advance.
>> >
>> >
>> > -- 
>> > Andy Quiroz mcsa mcse
>> > System Engineer III
>> > University of Southern California
>> > Keck School of Medicine
>> > Information Systems
>> > andy.quiroz@keck.usc.edu
>> > http://www.usc.edu/kecktech
>>
>>
>>