|
| Re: bge0 watchdog timeout |
 |
Thu, 27 Mar 2008 19:15:39 +080 |
On Thu, Mar 27, 2008 at 6:48 PM, Jost Tobias Springenberg
<jspringe@uos.de> wrote:
> Hi there,
> after playing around with dragonfly for quite some weeks I decided
> it is time to set uo a production environment and I remembered an old IBM
eServer 325
> that I could use for this purpose.
> Installing and compiling a SMP kernel worked flawlessly however there is
one major bug:
> The machine has two bge cards bge0 and bge1 the latter works fine but the
first
Mmm, are two bge same?
Have you tried polling?
try setting hw.bge0.tx_coal_ticks to 400 without polling enabled.
Default value _may_ be too big for certain bge chips.
Best Regards,
sephe
> always gives watchdog timeouts.
> This happens regardless of wheather I am running a UP or SMP kernel.
> Turnig off APIC_IO while using an SMP kernel also made no difference.
> Any ideas to why this might be happening ?
> Machines are down for maintenance and I have not yet grabbed a full
dmesg,
> sorry for that.
> Tobias
>
> --
> Jost Tobias Springenberg <jspringe@uos.de>
>
--
|
| Post Reply
|
|
|
|
|
|
|
|
|
|