|
| OO2 installs but won't start |
 |
Thu, 14 Jun 2007 13:53:00 -070 |
I have successfully? installed OOo 2.0.4. When trying to start any of
the modules, I just get a series of system beeps. Posted below is an
outtake of soffice.log.
I have uclip 0.2.2, libc 0.6.2, Innotek font engine etc. This is a new
eCS 1.1 system with all the available updates via eCSMT.
--
Trap message -- Date: 2007-06-14, Time: 13:38:37
-------------------------------------------------------
An internal error occurred (Built Feb 7 2007-18:54:16).
Running OS/2 version: 20.45 (WSeB kernel)
excHandlerLoud:
Exception type: C0000005
Address: 1642BF5E
Params: 00000001 00000004
XCPT_ACCESS_VIOLATION: Invalid read access from 0x0053:00000004.
Explanation: An attempt was made to access a memory object which does
not belong to the current process. Most probable causes
for this are that an invalid pointer was used, there was
confusion with administering memory or error conditions
were not properly checked for.
Process information:
Process ID: 0x59
Process module: 0x169A (F:\OPENOFFICE.ORG.2.0\PROGRAM\SOFFICE.BIN)
Trapping module: 0x1622 (F:\OPENOFFICE.ORG.2.0\PROGRAM\SAL3.DLL)
Object: 0
Trapping thread information:
Thread ID: 0x1 (1)
Thread slot ID: 0xA4 (164)
Priority: 0x200
Registers:
DS = 00000053 invalid
ES = 00000053 invalid
FS = 0000150B invalid
GS = 00000000 invalid
EAX = 00000000 invalid
EBX = 00000000 invalid
ECX = 00000000 invalid
EDX = 00000000 invalid
ESI = 2003FE20 valid, flags: read write committed
EDI = 0015D930 valid, flags: read write committed
Instruction pointer (where exception occured):
CS:EIP = 005B:1642BF5E valid, flags: read execute committed shared
EFLAGS = 00012297
Stack:
Base: 00060000
Limit: 00160000
SS:ESP = 0053:0015D3BC valid, flags: read write committed
EBP = 0015D438 valid, flags: read write committed
Stack frames:
Address Module seg:ofs
CS:EIP : 1642BF5E SAL3 01:0002BF5E
file? 146
_rtl_uString_getLength (ustring.obj)
0015D438: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015D468: 1642E5BF SAL3 01:0002E5BF
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015D988: 1642EE96 SAL3 01:0002EE96
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015DA28: 16413952 SAL3 01:00013952
file? 146
__ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
0015DAA8: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015DAD8: 1642EB4B SAL3 01:0002EB4B
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015DFF8: 1642EEB0 SAL3 01:0002EEB0
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015E098: 16413952 SAL3 01:00013952
file? 146
__ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
0015E118: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015E148: 1642E5BF SAL3 01:0002E5BF
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015E668: 1642EE96 SAL3 01:0002EE96
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015E708: 16413952 SAL3 01:00013952
file? 146
__ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
0015E788: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015E7B8: 1642E5BF SAL3 01:0002E5BF
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015ECD8: 1642EE96 SAL3 01:0002EE96
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015ED78: 16413952 SAL3 01:00013952
file? 146
__ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
0015EDF8: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015EE28: 1642E5BF SAL3 01:0002E5BF
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015F348: 1642ED3A SAL3 01:0002ED3A
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015F3E8: 1642E686 SAL3 01:0002E686
file? 30
__ZN14ArgParserState10expandTermEh (macro.obj)
0015F908: 1642EEB0 SAL3 01:0002EEB0
file? 30
__Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
0015F9A8: 16413952 SAL3 01:00013952
file? 146
__ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
0015FA28: 164145A7 SAL3 01:000145A7
file? 146
_rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
0015FA58: 156AEC12 CPPUH3 01:0000EC12
file? 146
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c20findBoostrapArgumentERKN3rtl9BootstrapERKNS1_8OUStr
ingEPh
(bootstrap.obj)
0015FAF8: 156AFCE5 CPPUH3 01:0000FCE5
file? 146
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c40defaultBootstrap_InitialComponentContextERKN3rtl9Bo
otstrapE
(bootstrap.obj)
0015FC68: 156B094F CPPUH3 01:0001094F
file? 146
__ZN4cppu40defaultBootstrap_InitialComponentContextEv (bootstrap.obj)
0015FC88: 0002B6B2 SOFFICE 01:0001B6B2
88
__ZN7desktop7Desktop31CreateApplicationServiceManagerEv (appinit.obj)
0015FCF8: 00011603 SOFFICE 01:00001603
88
__ZN7desktop7Desktop4InitEv (app.obj)
0015FD28: 15F90CD0 VCL680GO 01:00000CD0
file? 146
__Z7InitVCLRKN3com3sun4star3uno9ReferenceINS1_4lang20XMultiServiceFactoryEEE
(svmain.obj)
0015FDB8: 15F90716 VCL680GO 01:00000716
file? 146 __Z10ImplSVMainv
(svmain.obj)
0015FE28: 15F908BE VCL680GO 01:000008BE
file? 146 __Z6SVMainv
(svmain.obj)
0015FE38: 000100D6 SOFFICE 01:000000D6
88 _sal_main (main.obj)
0015FE98: 1640B8B9 SAL3 01:0000B8B9
file? 146 _osl_ProcessHook
(process.obj)
0015FF48: 0001007F SOFFICE 01:0000007F
88 _main (main.obj)
0015FF70: 00010041 SOFFICE 01:00000041
84 __text ({standard
input})
0015FFE0: 1DDE850B LIBC062 01:0002850B
Cannot find symbol file
E:\OS2\DLL\LIBC062.SYM
|
| Post Reply
|
| Re: OO2 installs but won't start |
 |
Tue, 26 Jun 2007 22:28:44 -040 |
Brendan:
I had a problem like the one you describe. The solution is to set a HOME
variable,
SET HOME=(some existing directory)
Eduardo Vila
Brendan McCullough ha escrito:
> I have successfully? installed OOo 2.0.4. When trying to start any of
> the modules, I just get a series of system beeps. Posted below is an
> outtake of soffice.log.
>
> I have uclip 0.2.2, libc 0.6.2, Innotek font engine etc. This is a new
> eCS 1.1 system with all the available updates via eCSMT.
>
> --
> Trap message -- Date: 2007-06-14, Time: 13:38:37
> -------------------------------------------------------
>
> An internal error occurred (Built Feb 7 2007-18:54:16).
> Running OS/2 version: 20.45 (WSeB kernel)
>
> excHandlerLoud:
> Exception type: C0000005
> Address: 1642BF5E
> Params: 00000001 00000004
> XCPT_ACCESS_VIOLATION: Invalid read access from 0x0053:00000004.
> Explanation: An attempt was made to access a memory object which does
> not belong to the current process. Most probable causes
> for this are that an invalid pointer was used, there was
> confusion with administering memory or error conditions
> were not properly checked for.
>
> Process information:
> Process ID: 0x59
> Process module: 0x169A (F:\OPENOFFICE.ORG.2.0\PROGRAM\SOFFICE.BIN)
> Trapping module: 0x1622 (F:\OPENOFFICE.ORG.2.0\PROGRAM\SAL3.DLL)
> Object: 0
>
> Trapping thread information:
> Thread ID: 0x1 (1)
> Thread slot ID: 0xA4 (164)
> Priority: 0x200
>
> Registers:
> DS = 00000053 invalid
> ES = 00000053 invalid
> FS = 0000150B invalid
> GS = 00000000 invalid
> EAX = 00000000 invalid
> EBX = 00000000 invalid
> ECX = 00000000 invalid
> EDX = 00000000 invalid
> ESI = 2003FE20 valid, flags: read write committed
> EDI = 0015D930 valid, flags: read write committed
> Instruction pointer (where exception occured):
> CS:EIP = 005B:1642BF5E valid, flags: read execute committed shared
> EFLAGS = 00012297
> Stack:
> Base: 00060000
> Limit: 00160000
> SS:ESP = 0053:0015D3BC valid, flags: read write committed
> EBP = 0015D438 valid, flags: read write committed
>
> Stack frames:
> Address Module seg:ofs
> CS:EIP : 1642BF5E SAL3 01:0002BF5E
> file? 146
> _rtl_uString_getLength (ustring.obj)
>
> 0015D438: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015D468: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015D988: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015DA28: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015DAA8: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015DAD8: 1642EB4B SAL3 01:0002EB4B
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015DFF8: 1642EEB0 SAL3 01:0002EEB0
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015E098: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015E118: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015E148: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015E668: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015E708: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015E788: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015E7B8: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015ECD8: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015ED78: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015EDF8: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015EE28: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015F348: 1642ED3A SAL3 01:0002ED3A
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015F3E8: 1642E686 SAL3 01:0002E686
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015F908: 1642EEB0 SAL3 01:0002EEB0
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015F9A8: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015FA28: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015FA58: 156AEC12 CPPUH3 01:0000EC12
> file? 146
>
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c20findBoostrapArgumentERKN3rtl9BootstrapERKNS1_8OUStr
ingEPh
> (bootstrap.obj)
>
> 0015FAF8: 156AFCE5 CPPUH3 01:0000FCE5
> file? 146
>
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c40defaultBootstrap_InitialComponentContextERKN3rtl9Bo
otstrapE
> (bootstrap.obj)
>
> 0015FC68: 156B094F CPPUH3 01:0001094F
> file? 146
> __ZN4cppu40defaultBootstrap_InitialComponentContextEv (bootstrap.obj)
>
> 0015FC88: 0002B6B2 SOFFICE 01:0001B6B2
> 88
> __ZN7desktop7Desktop31CreateApplicationServiceManagerEv (appinit.obj)
>
> 0015FCF8: 00011603 SOFFICE 01:00001603
> 88
> __ZN7desktop7Desktop4InitEv (app.obj)
>
> 0015FD28: 15F90CD0 VCL680GO 01:00000CD0
> file? 146
>
__Z7InitVCLRKN3com3sun4star3uno9ReferenceINS1_4lang20XMultiServiceFactoryEEE
> (svmain.obj)
>
> 0015FDB8: 15F90716 VCL680GO 01:00000716
> file? 146 __Z10ImplSVMainv
> (svmain.obj)
>
> 0015FE28: 15F908BE VCL680GO 01:000008BE
> file? 146 __Z6SVMainv
> (svmain.obj)
>
> 0015FE38: 000100D6 SOFFICE 01:000000D6
> 88 _sal_main (main.obj)
>
> 0015FE98: 1640B8B9 SAL3 01:0000B8B9
> file? 146 _osl_ProcessHook
> (process.obj)
>
> 0015FF48: 0001007F SOFFICE 01:0000007F
> 88 _main (main.obj)
>
> 0015FF70: 00010041 SOFFICE 01:00000041
> 84 __text ({standard
> input})
>
> 0015FFE0: 1DDE850B LIBC062 01:0002850B
> Cannot find symbol file
> E:\OS2\DLL\LIBC062.SYM
>
>
|
| Post Reply
|
| Re: OO2 installs but won't start |
 |
Fri, 21 Sep 2007 09:43:26 +020 |
Hello to all.
I had the same Problem after the first install.
Now there is a existing DIR but the program didn't start either.
When i try to start the writer (TEXTDOCUMENT) the program start but after
the welcome screen a window is opened with the information 'the program
4-swriter does not exist'
What goes wrong?
Can someone help me?
Thanks.
Regards - Paolo Pirillo
Brendan McCullough schrieb:
> I have successfully? installed OOo 2.0.4. When trying to start any of
> the modules, I just get a series of system beeps. Posted below is an
> outtake of soffice.log.
>
> I have uclip 0.2.2, libc 0.6.2, Innotek font engine etc. This is a new
> eCS 1.1 system with all the available updates via eCSMT.
>
> --
> Trap message -- Date: 2007-06-14, Time: 13:38:37
> -------------------------------------------------------
>
> An internal error occurred (Built Feb 7 2007-18:54:16).
> Running OS/2 version: 20.45 (WSeB kernel)
>
> excHandlerLoud:
> Exception type: C0000005
> Address: 1642BF5E
> Params: 00000001 00000004
> XCPT_ACCESS_VIOLATION: Invalid read access from 0x0053:00000004.
> Explanation: An attempt was made to access a memory object which does
> not belong to the current process. Most probable causes
> for this are that an invalid pointer was used, there was
> confusion with administering memory or error conditions
> were not properly checked for.
>
> Process information:
> Process ID: 0x59
> Process module: 0x169A (F:\OPENOFFICE.ORG.2.0\PROGRAM\SOFFICE.BIN)
> Trapping module: 0x1622 (F:\OPENOFFICE.ORG.2.0\PROGRAM\SAL3.DLL)
> Object: 0
>
> Trapping thread information:
> Thread ID: 0x1 (1)
> Thread slot ID: 0xA4 (164)
> Priority: 0x200
>
> Registers:
> DS = 00000053 invalid
> ES = 00000053 invalid
> FS = 0000150B invalid
> GS = 00000000 invalid
> EAX = 00000000 invalid
> EBX = 00000000 invalid
> ECX = 00000000 invalid
> EDX = 00000000 invalid
> ESI = 2003FE20 valid, flags: read write committed
> EDI = 0015D930 valid, flags: read write committed
> Instruction pointer (where exception occured):
> CS:EIP = 005B:1642BF5E valid, flags: read execute committed shared
> EFLAGS = 00012297
> Stack:
> Base: 00060000
> Limit: 00160000
> SS:ESP = 0053:0015D3BC valid, flags: read write committed
> EBP = 0015D438 valid, flags: read write committed
>
> Stack frames:
> Address Module seg:ofs
> CS:EIP : 1642BF5E SAL3 01:0002BF5E
> file? 146
> _rtl_uString_getLength (ustring.obj)
>
> 0015D438: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015D468: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015D988: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015DA28: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015DAA8: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015DAD8: 1642EB4B SAL3 01:0002EB4B
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015DFF8: 1642EEB0 SAL3 01:0002EEB0
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015E098: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015E118: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015E148: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015E668: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015E708: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015E788: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015E7B8: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015ECD8: 1642EE96 SAL3 01:0002EE96
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015ED78: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015EDF8: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015EE28: 1642E5BF SAL3 01:0002E5BF
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015F348: 1642ED3A SAL3 01:0002ED3A
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015F3E8: 1642E686 SAL3 01:0002E686
> file? 30
> __ZN14ArgParserState10expandTermEh (macro.obj)
>
> 0015F908: 1642EEB0 SAL3 01:0002EEB0
> file? 30
> __Z12expandMacrosPvRKN3rtl8OUStringE (macro.obj)
>
> 0015F9A8: 16413952 SAL3 01:00013952
> file? 146
> __ZNK14Bootstrap_Impl8getValueEP12_rtl_uStringPS1_S1_ (distccd_117c11f5.o)
>
> 0015FA28: 164145A7 SAL3 01:000145A7
> file? 146
> _rtl_bootstrap_get_from_handle (distccd_117c11f5.o)
>
> 0015FA58: 156AEC12 CPPUH3 01:0000EC12
> file? 146
>
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c20findBoostrapArgumentERKN3rtl9BootstrapERKNS1_8OUStr
ingEPh
> (bootstrap.obj)
>
> 0015FAF8: 156AFCE5 CPPUH3 01:0000FCE5
> file? 146
>
__ZN4cppu96_GLOBAL__N_E__Dati_Yuri_rd_OpenOffice_svn_trunk_openoffice_cppuhelper
_source_bootstrap.cxxK9FU8c40defaultBootstrap_InitialComponentContextERKN3rtl9Bo
otstrapE
> (bootstrap.obj)
>
> 0015FC68: 156B094F CPPUH3 01:0001094F
> file? 146
> __ZN4cppu40defaultBootstrap_InitialComponentContextEv (bootstrap.obj)
>
> 0015FC88: 0002B6B2 SOFFICE 01:0001B6B2
> 88
> __ZN7desktop7Desktop31CreateApplicationServiceManagerEv (appinit.obj)
>
> 0015FCF8: 00011603 SOFFICE 01:00001603
> 88
> __ZN7desktop7Desktop4InitEv (app.obj)
>
> 0015FD28: 15F90CD0 VCL680GO 01:00000CD0
> file? 146
>
__Z7InitVCLRKN3com3sun4star3uno9ReferenceINS1_4lang20XMultiServiceFactoryEEE
> (svmain.obj)
>
> 0015FDB8: 15F90716 VCL680GO 01:00000716
> file? 146 __Z10ImplSVMainv
> (svmain.obj)
>
> 0015FE28: 15F908BE VCL680GO 01:000008BE
> file? 146 __Z6SVMainv
> (svmain.obj)
>
> 0015FE38: 000100D6 SOFFICE 01:000000D6
> 88 _sal_main (main.obj)
>
> 0015FE98: 1640B8B9 SAL3 01:0000B8B9
> file? 146 _osl_ProcessHook
> (process.obj)
>
> 0015FF48: 0001007F SOFFICE 01:0000007F
> 88 _main (main.obj)
>
> 0015FF70: 00010041 SOFFICE 01:00000041
> 84 __text ({standard
> input})
>
> 0015FFE0: 1DDE850B LIBC062 01:0002850B
> Cannot find symbol file
> E:\OS2\DLL\LIBC062.SYM
>
>
|
| Post Reply
|
|
|
|
|
|
|
|
|
|