rsync error

hello,

It's the first time I post some thing in this forum. I am using rsync over
Netware 6.5 to syncing 20 Novell servers. My wan conection is 2 Mb and I
run rsync at night when traffic is very low. I use the following parameters:

rsincstp.ncf

sys:rsync/rsyncdn Rsync172.17.X.Y:873

rsyncstr.ncf

sys:rsync/rsyncst
sys:rsync/rsync    --progress --address=172.17.X.Y --port=873   --daemon
--config=sys:etc/rsyncd.conf

It runs fine till the half of the operation, then hangs up with the
following errors.

rsync error: error in socket IO (code 10) at io.c(1898)


Any ideas on what may be causing this or how I can avoid this
error?

Hi,
jordi@newmedia-ps.com wrote in
news:JG9Zf.912$vF3.209@prv-forum2.provo.novell.com: 

> hello,
> 
> It's the first time I post some thing in this forum. I am using rsync
> over Netware 6.5 to syncing 20 Novell servers. My wan conection is 2 Mb
> and I run rsync at night when traffic is very low. I use the following
> parameters: 
> 
> rsincstp.ncf
> 
> sys:rsync/rsyncdn Rsync172.17.X.Y:873
> 
> rsyncstr.ncf
> 
> sys:rsync/rsyncst
> sys:rsync/rsync    --progress --address=172.17.X.Y --port=873   --daemon
> --config=sys:etc/rsyncd.conf
Do you know that you can configure/start/stop rsync through NRM?

> It runs fine till the half of the operation, then hangs up with the
> following errors.
> 
> rsync error: error in socket IO (code 10) at io.c(1898)
> 
> 
> Any ideas on what may be causing this or how I can avoid this
> error?
IIRC I got this error when I tried to sync a non-existing file...

Guenter.