|
| mysqlhotcopy fails after SP5 |
 |
Thu, 30 Mar 2006 13:46:09 GMT |
Hi ALl
I've had the mysqlhotcopy working for quite some time now, with SP4a,
and the latest 5.8.4 perl.
Now I've updated to SP5, and it stopped working, I get an abend if I run
it.
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.05
Address space BACKUP removed Thursday, 30 March 2006 15.31.27,861
Abend 0 on P00: Server-5.70.05: Page Fault Processor Exception (Error
code 00000004)
Registers:
CS = 0073 DS = 007B ES = 007B FS = 007B GS = 007B SS = 007B
EAX = 00000032 EBX = CC27E550 ECX = CBB72640 EDX = CC27D390
ESI = F3726641 EDI = 0000000A EBP = CBAE16F8 ESP = CBAE16B4
EIP = F53148D7 FLAGS = 00010206
F53148D7 2A07 SUB AL, [EDI]=?
EIP in LIBC.NLM at code start +000948D7h
Access Location: 0x0000000A
The violation occurred while processing the following instruction:
F53148D7 2A07 SUB AL, [EDI]=?
F53148D9 74F6 JZ F53148D1
F53148DB 0FBEC0 MOVSX EAX, AL
F53148DE 5E POP ESI
F53148DF 5F POP EDI
F53148E0 C3 RET
F53148E1 47 INC EDI
F53148E2 2A07 SUB AL, [EDI]
F53148E4 EBF5 JMP F53148DB
F53148E6 90 NOP
Running process: Server 00:44 Process
Thread Owned by NLM: SERVER.NLM
Stack pointer: CBAE16B4
User Space Stack limit: 0
Scheduling priority: 67371008
Wait state: 50500F0 Waiting for work
Stack: --00000001 (LOADER.NLM|KernelAddressSpace+1)
--CBAE60A0 ?
F373221C (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+FC)
-F3726640 (PMYSQL.NLM|(Data Start)+2640)
--0000000A (LOADER.NLM|KernelAddressSpace+A)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CC2FBEC0 ?
--CC2FB600 ?
--CBAE16F8 ?
--0000001A (LOADER.NLM|KernelAddressSpace+1A)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000002 (LOADER.NLM|KernelAddressSpace+2)
--0000000C (LOADER.NLM|KernelAddressSpace+C)
F3732120 (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+0)
--CBAE60A0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBAE1748 ?
F37DF964 (LIBPERL.NLM|LIBPERL@Perl_pp_entersub+634)
--CBAE60A0 ?
--CC2E8550 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBAE60A0 ?
--CBDC9B80 ?
--CBAE60A0 ?
F37D9BB0 (LIBPERL.NLM|LIBPERL@Perl_pp_rv2av+200)
--01B72644 ?
--00000080 (LOADER.NLM|KernelAddressSpace+80)
--CC2E8550 ?
--CBB72648 ?
--CBDCCB40 ?
--CBDC9B80 ?
--CBB72648 ?
--CBAE60A0 ?
--CBA4C040 ?
--CBAE60A0 ?
--CBAE1768 ?
F37D7CCA (LIBPERL.NLM|LIBPERL@Perl_runops_standard+1A)
--CBAE60A0 ?
--CBAEA2C0 ?
--CBA50134 ?
--CBA4C044 ?
--CC297100 ?
--CBAE60A0 ?
--CBAE1788 ?
F3784F2A (LIBPERL.NLM|LIBPERL@perl_run+38A)
--CBAE60A0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBAE18C8 ?
F3783AEC (LIBPERL.NLM|LIBPERL@perl_parse+25C)
--CBAE60A0 ?
--0000000C (LOADER.NLM|KernelAddressSpace+C)
--CBAE18D8 ?
F3784E4B (LIBPERL.NLM|LIBPERL@perl_run+2AB)
--CBAE60A0 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBAE6568 ?
--000000A7 (LOADER.NLM|KernelAddressSpace+A7)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--CBAE6568 ?
--0000000C (LOADER.NLM|KernelAddressSpace+C)
--CBAE60A0 ?
--CBAE60A0 ?
--CBA4C040 ?
--CBAE60A0 ?
--CBAE18D8 ?
F3784BD3 (LIBPERL.NLM|LIBPERL@perl_run+33)
--CBAE1790 ?
--007B007B ?
--007B0073 ?
F37E007B (LIBPERL.NLM|LIBPERL@Perl_vivify_ref+FB)
--CBA482C0 ?
-F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBA482C0 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000900 (LOADER.NLM|KernelAddressSpace+900)
F53561CD (USERLIB.NLM|R3MutexUnlock+65)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--CBAE1848 ?
F37EA864 (LIBPERL.NLM|LIBPERL@Perl_sv_vsetpvfn+44)
--CBAE60A0 ?
--CBAEA2B0 ?
-F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
F53571D4 (USERLIB.NLM|AllocMemoryDefault+BC)
--CB342274 ?
--CBAE18A4 ?
--00000008 (LOADER.NLM|KernelAddressSpace+8)
-F3766492 (LIBPERL.NLM|(Data Start)+492)
--CBAEA2B0 ?
--CBAE60A0 ?
--CBAEA2B0 ?
--CBAE60A0 ?
Additional Information:
The CPU encountered a problem executing code in LIBC.NLM. The
problem may be in that module or in data passed to that module by a
process owned by SERVER.NLM.
I know the SP5 server.exe needs an update, so we'll probably get an SP5a
soon, but why does this fail?
I've applied the latest perl I could find "perl-5.9.3-10022006-dev-
netware-build".
I've also tried to apply the 5.8.4 patches ("dbdmysql-for-perl-5.8.4-
mysql5.0.3a") just to make sure, but that didn't help.
If I enter "m perl" on the console I still get:
SPIFF <1>:m perl*
PERL.NLM
Loaded from [SYS:SYSTEM\] on 30 Mar 2006 15.32.39
(Address Space = OS)
Perl 5.8.4 - Command Line Interface
Version 5.00 10 February 2006
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Why doesn't it say 5.9.3?
I can see there's a new libc in beta, but I'm reluctant to apply it,
because it affects too much of the system.
I know Kmurugan looked at this back in october, but I never saw an
update that expressed that this was resolved officially.
--
/Fribse
Barry (Sysop): "Then again, I'm a single CPU fan..."
Bob (Trafficshaper): "You can get a job cooling CPUs? Does it pay
well?"
|
| Post Reply
|
| Re: mysqlhotcopy fails after SP5 |
 |
Mon, 03 Apr 2006 08:54:23 GMT |
Fribse wrote:
> Hi ALl
> I've had the mysqlhotcopy working for quite some time now, with SP4a,
> and the latest 5.8.4 perl.
> Now I've updated to SP5, and it stopped working, I get an abend if I run
> it.
> Novell Open Enterprise Server, NetWare 6.5
> PVER: 6.50.05
> Address space BACKUP removed Thursday, 30 March 2006 15.31.27,861
> Abend 0 on P00: Server-5.70.05: Page Fault Processor Exception (Error
> code 00000004)
> Registers:
> CS = 0073 DS = 007B ES = 007B FS = 007B GS = 007B SS = 007B
> EAX = 00000032 EBX = CC27E550 ECX = CBB72640 EDX = CC27D390
> ESI = F3726641 EDI = 0000000A EBP = CBAE16F8 ESP = CBAE16B4
> EIP = F53148D7 FLAGS = 00010206
> F53148D7 2A07 SUB AL, [EDI]=?
> EIP in LIBC.NLM at code start +000948D7h
> Access Location: 0x0000000A
> The violation occurred while processing the following instruction:
> F53148D7 2A07 SUB AL, [EDI]=?
> F53148D9 74F6 JZ F53148D1
> F53148DB 0FBEC0 MOVSX EAX, AL
> F53148DE 5E POP ESI
> F53148DF 5F POP EDI
> F53148E0 C3 RET
> F53148E1 47 INC EDI
> F53148E2 2A07 SUB AL, [EDI]
> F53148E4 EBF5 JMP F53148DB
> F53148E6 90 NOP
> Running process: Server 00:44 Process
> Thread Owned by NLM: SERVER.NLM
> Stack pointer: CBAE16B4
> User Space Stack limit: 0
> Scheduling priority: 67371008
> Wait state: 50500F0 Waiting for work
> Stack: --00000001 (LOADER.NLM|KernelAddressSpace+1)
> --CBAE60A0 ?
> F373221C (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+FC)
> -F3726640 (PMYSQL.NLM|(Data Start)+2640)
> --0000000A (LOADER.NLM|KernelAddressSpace+A)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CC2FBEC0 ?
> --CC2FB600 ?
> --CBAE16F8 ?
> --0000001A (LOADER.NLM|KernelAddressSpace+1A)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000002 (LOADER.NLM|KernelAddressSpace+2)
> --0000000C (LOADER.NLM|KernelAddressSpace+C)
> F3732120 (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+0)
> --CBAE60A0 ?
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBAE1748 ?
> F37DF964 (LIBPERL.NLM|LIBPERL@Perl_pp_entersub+634)
> --CBAE60A0 ?
> --CC2E8550 ?
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBAE60A0 ?
> --CBDC9B80 ?
> --CBAE60A0 ?
> F37D9BB0 (LIBPERL.NLM|LIBPERL@Perl_pp_rv2av+200)
> --01B72644 ?
> --00000080 (LOADER.NLM|KernelAddressSpace+80)
> --CC2E8550 ?
> --CBB72648 ?
> --CBDCCB40 ?
> --CBDC9B80 ?
> --CBB72648 ?
> --CBAE60A0 ?
> --CBA4C040 ?
> --CBAE60A0 ?
> --CBAE1768 ?
> F37D7CCA (LIBPERL.NLM|LIBPERL@Perl_runops_standard+1A)
> --CBAE60A0 ?
> --CBAEA2C0 ?
> --CBA50134 ?
> --CBA4C044 ?
> --CC297100 ?
> --CBAE60A0 ?
> --CBAE1788 ?
> F3784F2A (LIBPERL.NLM|LIBPERL@perl_run+38A)
> --CBAE60A0 ?
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBAE18C8 ?
> F3783AEC (LIBPERL.NLM|LIBPERL@perl_parse+25C)
> --CBAE60A0 ?
> --0000000C (LOADER.NLM|KernelAddressSpace+C)
> --CBAE18D8 ?
> F3784E4B (LIBPERL.NLM|LIBPERL@perl_run+2AB)
> --CBAE60A0 ?
> --00000001 (LOADER.NLM|KernelAddressSpace+1)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBAE6568 ?
> --000000A7 (LOADER.NLM|KernelAddressSpace+A7)
> --00000001 (LOADER.NLM|KernelAddressSpace+1)
> --00000001 (LOADER.NLM|KernelAddressSpace+1)
> --CBAE6568 ?
> --0000000C (LOADER.NLM|KernelAddressSpace+C)
> --CBAE60A0 ?
> --CBAE60A0 ?
> --CBA4C040 ?
> --CBAE60A0 ?
> --CBAE18D8 ?
> F3784BD3 (LIBPERL.NLM|LIBPERL@perl_run+33)
> --CBAE1790 ?
> --007B007B ?
> --007B0073 ?
> F37E007B (LIBPERL.NLM|LIBPERL@Perl_vivify_ref+FB)
> --CBA482C0 ?
> -F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBA482C0 ?
> --00000001 (LOADER.NLM|KernelAddressSpace+1)
> --00000900 (LOADER.NLM|KernelAddressSpace+900)
> F53561CD (USERLIB.NLM|R3MutexUnlock+65)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> --CBAE1848 ?
> F37EA864 (LIBPERL.NLM|LIBPERL@Perl_sv_vsetpvfn+44)
> --CBAE60A0 ?
> --CBAEA2B0 ?
> -F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
> --00000000 (LOADER.NLM|KernelAddressSpace+0)
> F53571D4 (USERLIB.NLM|AllocMemoryDefault+BC)
> --CB342274 ?
> --CBAE18A4 ?
> --00000008 (LOADER.NLM|KernelAddressSpace+8)
> -F3766492 (LIBPERL.NLM|(Data Start)+492)
> --CBAEA2B0 ?
> --CBAE60A0 ?
> --CBAEA2B0 ?
> --CBAE60A0 ?
> Additional Information:
> The CPU encountered a problem executing code in LIBC.NLM. The
> problem may be in that module or in data passed to that module by a
> process owned by SERVER.NLM.
> I know the SP5 server.exe needs an update, so we'll probably get an SP5a
> soon, but why does this fail?
> I've applied the latest perl I could find "perl-5.9.3-10022006-dev-
> netware-build".
> I've also tried to apply the 5.8.4 patches ("dbdmysql-for-perl-5.8.4-
> mysql5.0.3a") just to make sure, but that didn't help.
> If I enter "m perl" on the console I still get:
> SPIFF <1>:m perl*
> PERL.NLM
> Loaded from [SYS:SYSTEM] on 30 Mar 2006 15.32.39
> (Address Space = OS)
> Perl 5.8.4 - Command Line Interface
> Version 5.00 10 February 2006
> Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
> Why doesn't it say 5.9.3?
> I can see there's a new libc in beta, but I'm reluctant to apply it,
> because it affects too much of the system.
> I know Kmurugan looked at this back in october, but I never saw an
> update that expressed that this was resolved officially.
I need the version information of libmysql.nlm which is loaded at the time
of abend. Ofcourse pmysql.nlm verison also.
|
| Post Reply
|
| Re: mysqlhotcopy fails after SP5 |
 |
Mon, 03 Apr 2006 08:59:04 GMT |
kmurugan wrote:
I want to know about the libmysql.nlm which is loaded at the time of
abend. ofcourse pmysql.nlm also.
:=)
Regards
K.Murugan
> Fribse wrote:
> > Hi ALl
> > I've had the mysqlhotcopy working for quite some time now, with SP4a,
> > and the latest 5.8.4 perl.
> > Now I've updated to SP5, and it stopped working, I get an abend if I
run
> > it.
> > Novell Open Enterprise Server, NetWare 6.5
> > PVER: 6.50.05
> > Address space BACKUP removed Thursday, 30 March 2006 15.31.27,861
> > Abend 0 on P00: Server-5.70.05: Page Fault Processor Exception (Error
> > code 00000004)
> > Registers:
> > CS = 0073 DS = 007B ES = 007B FS = 007B GS = 007B SS = 007B
> > EAX = 00000032 EBX = CC27E550 ECX = CBB72640 EDX = CC27D390
> > ESI = F3726641 EDI = 0000000A EBP = CBAE16F8 ESP = CBAE16B4
> > EIP = F53148D7 FLAGS = 00010206
> > F53148D7 2A07 SUB AL, [EDI]=?
> > EIP in LIBC.NLM at code start +000948D7h
> > Access Location: 0x0000000A
> > The violation occurred while processing the following instruction:
> > F53148D7 2A07 SUB AL, [EDI]=?
> > F53148D9 74F6 JZ F53148D1
> > F53148DB 0FBEC0 MOVSX EAX, AL
> > F53148DE 5E POP ESI
> > F53148DF 5F POP EDI
> > F53148E0 C3 RET
> > F53148E1 47 INC EDI
> > F53148E2 2A07 SUB AL, [EDI]
> > F53148E4 EBF5 JMP F53148DB
> > F53148E6 90 NOP
> > Running process: Server 00:44 Process
> > Thread Owned by NLM: SERVER.NLM
> > Stack pointer: CBAE16B4
> > User Space Stack limit: 0
> > Scheduling priority: 67371008
> > Wait state: 50500F0 Waiting for work
> > Stack: --00000001 (LOADER.NLM|KernelAddressSpace+1)
> > --CBAE60A0 ?
> > F373221C (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+FC)
> > -F3726640 (PMYSQL.NLM|(Data Start)+2640)
> > --0000000A (LOADER.NLM|KernelAddressSpace+A)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CC2FBEC0 ?
> > --CC2FB600 ?
> > --CBAE16F8 ?
> > --0000001A (LOADER.NLM|KernelAddressSpace+1A)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000002 (LOADER.NLM|KernelAddressSpace+2)
> > --0000000C (LOADER.NLM|KernelAddressSpace+C)
> > F3732120 (PMYSQL.NLM|PMYSQL@boot_DBD__mysql+0)
> > --CBAE60A0 ?
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBAE1748 ?
> > F37DF964 (LIBPERL.NLM|LIBPERL@Perl_pp_entersub+634)
> > --CBAE60A0 ?
> > --CC2E8550 ?
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBAE60A0 ?
> > --CBDC9B80 ?
> > --CBAE60A0 ?
> > F37D9BB0 (LIBPERL.NLM|LIBPERL@Perl_pp_rv2av+200)
> > --01B72644 ?
> > --00000080 (LOADER.NLM|KernelAddressSpace+80)
> > --CC2E8550 ?
> > --CBB72648 ?
> > --CBDCCB40 ?
> > --CBDC9B80 ?
> > --CBB72648 ?
> > --CBAE60A0 ?
> > --CBA4C040 ?
> > --CBAE60A0 ?
> > --CBAE1768 ?
> > F37D7CCA (LIBPERL.NLM|LIBPERL@Perl_runops_standard+1A)
> > --CBAE60A0 ?
> > --CBAEA2C0 ?
> > --CBA50134 ?
> > --CBA4C044 ?
> > --CC297100 ?
> > --CBAE60A0 ?
> > --CBAE1788 ?
> > F3784F2A (LIBPERL.NLM|LIBPERL@perl_run+38A)
> > --CBAE60A0 ?
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBAE18C8 ?
> > F3783AEC (LIBPERL.NLM|LIBPERL@perl_parse+25C)
> > --CBAE60A0 ?
> > --0000000C (LOADER.NLM|KernelAddressSpace+C)
> > --CBAE18D8 ?
> > F3784E4B (LIBPERL.NLM|LIBPERL@perl_run+2AB)
> > --CBAE60A0 ?
> > --00000001 (LOADER.NLM|KernelAddressSpace+1)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBAE6568 ?
> > --000000A7 (LOADER.NLM|KernelAddressSpace+A7)
> > --00000001 (LOADER.NLM|KernelAddressSpace+1)
> > --00000001 (LOADER.NLM|KernelAddressSpace+1)
> > --CBAE6568 ?
> > --0000000C (LOADER.NLM|KernelAddressSpace+C)
> > --CBAE60A0 ?
> > --CBAE60A0 ?
> > --CBA4C040 ?
> > --CBAE60A0 ?
> > --CBAE18D8 ?
> > F3784BD3 (LIBPERL.NLM|LIBPERL@perl_run+33)
> > --CBAE1790 ?
> > --007B007B ?
> > --007B0073 ?
> > F37E007B (LIBPERL.NLM|LIBPERL@Perl_vivify_ref+FB)
> > --CBA482C0 ?
> > -F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBA482C0 ?
> > --00000001 (LOADER.NLM|KernelAddressSpace+1)
> > --00000900 (LOADER.NLM|KernelAddressSpace+900)
> > F53561CD (USERLIB.NLM|R3MutexUnlock+65)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > --CBAE1848 ?
> > F37EA864 (LIBPERL.NLM|LIBPERL@Perl_sv_vsetpvfn+44)
> > --CBAE60A0 ?
> > --CBAEA2B0 ?
> > -F377575C (LIBPERL.NLM|LIBPERL@PL_simple+530A)
> > --00000000 (LOADER.NLM|KernelAddressSpace+0)
> > F53571D4 (USERLIB.NLM|AllocMemoryDefault+BC)
> > --CB342274 ?
> > --CBAE18A4 ?
> > --00000008 (LOADER.NLM|KernelAddressSpace+8)
> > -F3766492 (LIBPERL.NLM|(Data Start)+492)
> > --CBAEA2B0 ?
> > --CBAE60A0 ?
> > --CBAEA2B0 ?
> > --CBAE60A0 ?
> > Additional Information:
> > The CPU encountered a problem executing code in LIBC.NLM. The
> > problem may be in that module or in data passed to that module by a
> > process owned by SERVER.NLM.
> > I know the SP5 server.exe needs an update, so we'll probably get an
SP5a
> > soon, but why does this fail?
> > I've applied the latest perl I could find
"perl-5.9.3-10022006-dev-
> > netware-build".
> > I've also tried to apply the 5.8.4 patches
("dbdmysql-for-perl-5.8.4-
> > mysql5.0.3a") just to make sure, but that didn't help.
> > If I enter "m perl" on the console I still get:
> > SPIFF <1>:m perl*
> > PERL.NLM
> > Loaded from [SYS:SYSTEM] on 30 Mar 2006 15.32.39
> > (Address Space = OS)
> > Perl 5.8.4 - Command Line Interface
> > Version 5.00 10 February 2006
> > Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
> > Why doesn't it say 5.9.3?
> > I can see there's a new libc in beta, but I'm reluctant to apply it,
> > because it affects too much of the system.
> > I know Kmurugan looked at this back in october, but I never saw an
> > update that expressed that this was resolved officially.
> I need the version information of libmysql.nlm which is loaded at the time
> of abend. Ofcourse pmysql.nlm verison also.
|
| Post Reply
|
| Re: mysqlhotcopy fails after SP5 |
 |
Mon, 03 Apr 2006 11:40:25 GMT |
In article <st5Yf.3868$Cc6.3751@prv-forum2.provo.novell.com>,
kmurugan@novell.com says...
> kmurugan wrote:
>
> I want to know about the libmysql.nlm which is loaded at the time of
> abend. ofcourse pmysql.nlm also.
Ok, just made it abend again, to get the info :-)
The info from the abend:
PMYSQL.NLM Perl 5.8.4 - MySQL-4.0 Extension
Version 5.00 7 June 2005
Code Address: 78BE2000h Length: 000097E0h
Data Address: 59E3E000h Length: 00003940h
LIBMYSQL.NLM MySQL Client Library
Version 5.00.16 18 November 2005
Code Address: 78BBB000h Length: 00026BF8h
Data Address: 78912000h Length: 000FBFF8h
I do see that it says mysql-4.0 extension, but I can't find a newer perl
that works any better (at least this one doesn't abend the server during
boot :-/ ).
--
/Fribse
Barry (Sysop): "Then again, I'm a single CPU fan..."
Bob (Trafficshaper): "You can get a job cooling CPUs? Does it pay
well?"
|
| Post Reply
|
| Re: mysqlhotcopy fails after SP5 |
 |
Tue, 04 Apr 2006 09:37:25 GMT |
Hi,
I request you to try with the Perl 5.8.4 module which is built for Mysql
5.0
http://forge.novell.com/modules/xfcontent/downloads.php/perl/Modules/MySQL%205.0
/
Regards
K.Murugan
> In article <st5Yf.3868$Cc6.3751@prv-forum2.provo.novell.com>,
> kmurugan@novell.com says...
> > kmurugan wrote:
> >
> > I want to know about the libmysql.nlm which is loaded at the time of
> > abend. ofcourse pmysql.nlm also.
> Ok, just made it abend again, to get the info :-)
> The info from the abend:
> PMYSQL.NLM Perl 5.8.4 - MySQL-4.0 Extension
> Version 5.00 7 June 2005
> Code Address: 78BE2000h Length: 000097E0h
> Data Address: 59E3E000h Length: 00003940h
> LIBMYSQL.NLM MySQL Client Library
> Version 5.00.16 18 November 2005
> Code Address: 78BBB000h Length: 00026BF8h
> Data Address: 78912000h Length: 000FBFF8h
> I do see that it says mysql-4.0 extension, but I can't find a newer perl
> that works any better (at least this one doesn't abend the server during
> boot :-/ ).
|
| Post Reply
|
|
|