Groups > WordPerfect Office > WordPerfect 11 > Re: 4x6 card margins print not what set for




4x6 card margins print not what set for

4x6 card margins print not what set for
Sat, 28 Jul 2007 13:50:18 -070
I set my print margins up in WP11 and check with a print preview but when I 
print to HP 1012 laserjet they are off.

Just started doing this and used to print exactly like shown in print 
preview. Have tried everything nothing helps cure the problem.

Jack 


Post Reply
Re: 4x6 card margins print not what set for
Sun, 29 Jul 2007 08:44:47 -070
Charles,

Other software like my Photo Brush, Photo Imaging and EditPad print out 
perfect margins as I specified in page set up. I have downloaded the latest 
driver for the printer & re-installed it and the printer. Still same problem

only on WP11.

Only changes my margins when printing a card such as 4x6, all margins print 
out OK on 8.5x11 std. sheet.

Jack

"Charles Rossiter" <ctech@corel.ca> wrote in message 
news:46aafc9b_1@cnews...
>
> Jack,
>
> 1. It may be that your printer driver has become corrupted.  Do you get 
> the same problem printing from other applications?  If so, try deleting 
> your printer driver in the standard Windows printer dialog.  While there, 
> also do File, Server Properties, Drivers tab, and delete the drivers as 
> well.  Then re-install the printer.  It would be a good time to check for 
> updated printer drivers from the manufacturer's web site.
>
> 2. Otherwise, you could do Format, Page, Page Setup, click on the relevant

> paper definition, Edit, and set suitable printer adjustments.
>
>
> Jack wrote:
>> I set my print margins up in WP11 and check with a print preview but
when 
>> I print to HP 1012 laserjet they are off.
>>
>> Just started doing this and used to print exactly like shown in print 
>> preview. Have tried everything nothing helps cure the problem.
>>
>> Jack
>
> -- 
>  Charles Rossiter
>  Volunteer C_Tech
> {Please respond to
>  news groups only}
> 


Post Reply
Re: 4x6 card margins print not what set for
Sun, 29 Jul 2007 10:10:02 -070
That is correct also on 3x5 5x8 etc.
Also other software, only on WP11 it moves the image over to the right side 
of card leaving a wide margin on the left side.
Jack

"lemoto" <ctech@corel.ca> wrote in message 
news:VA.0000475e.0013e497@corel.ca...
>
> Jack:
>> Other software like my Photo Brush, Photo Imaging and EditPad print
out
>> perfect margins as I specified in page set up.
>>
> . . . on 4 x 6?
> -- 
> Good wishes!
> Roy Lewis
> C_Tech volunteer
> (UK)
>
> 


Post Reply
Re: 4x6 card margins print not what set for
Sun, 29 Jul 2007 10:23:40 +020
Jack,

1. It may be that your printer driver has become corrupted.  Do you get 
the same problem printing from other applications?  If so, try deleting 
your printer driver in the standard Windows printer dialog.  While 
there, also do File, Server Properties, Drivers tab, and delete the 
drivers as well.  Then re-install the printer.  It would be a good time 
to check for updated printer drivers from the manufacturer's web site.

2. Otherwise, you could do Format, Page, Page Setup, click on the 
relevant paper definition, Edit, and set suitable printer adjustments.


Jack wrote:
> I set my print margins up in WP11 and check with a print preview but when I

> print to HP 1012 laserjet they are off.
> 
> Just started doing this and used to print exactly like shown in print 
> preview. Have tried everything nothing helps cure the problem.
> 
> Jack 
> 
> 
> 

-- 
  Charles Rossiter
  Volunteer C_Tech
{Please respond to
  news groups only}
Post Reply
Re: 4x6 card margins print not what set for
Sun, 29 Jul 2007 11:51:52 -070
Charles,

Same thing, I've tried everything I can think of, I suspect it has to be 
WP11, being all the rest of my software prints out margins OK.

I have a new copy of WP x3, but gave up after it kept dialing up. I see 
there is SP1 & SP2 available for it, but with only a dial-up and 82 Mb SP 
downloads I gave up & went back to WP11.

Jack


"Charles Rossiter" <ctech@corel.ca> wrote in message 
news:46ab7c55_3@cnews...
>
> Jack,
>
> What happens if you try setting the printer position adjustments, as 
> required?
>
> Jack wrote:
>> That is correct also on 3x5 5x8 etc.
>> Also other software, only on WP11 it moves the image over to the right

>> side of card leaving a wide margin on the left side.
>> Jack
>>
>> "lemoto" <ctech@corel.ca> wrote in message 
>> news:VA.0000475e.0013e497@corel.ca...
>>> Jack:
>>>> Other software like my Photo Brush, Photo Imaging and EditPad
print out
>>>> perfect margins as I specified in page set up.
>>>>
>>> . . . on 4 x 6?
>>> -- 
>>> Good wishes!
>>> Roy Lewis
>>> C_Tech volunteer
>>> (UK)
>>>
>>>
>>
>>
>>
>
> -- 
>  Charles Rossiter
>  Volunteer C_Tech
> {Please respond to
>  news groups only}
> 


Post Reply
<< Previous 1 2 3 Next >>
( Page 1 of 3 )
about | contact