more acpi on Asus M2N-E

I have now gotten the booting process to go farther, when the /apic 
switch is sent to acpi.psd. The system now stops booting just before I 
would expect the graphic interface to start up.

Also, there is no power saving...for instance the screen saver kicks in, 
but the monitor does not suspend at any time.

On 02/06/08 08:51 pm Paul wrote:

> I have now gotten the booting process to go farther, when the /apic 
> switch is sent to acpi.psd. The system now stops booting just before I 
> would expect the graphic interface to start up.
> 
> Also, there is no power saving...for instance the screen saver kicks in, 
> but the monitor does not suspend at any time.
> 
> Any ideas?

On my M2N-SLI Deluxe, it works in SMP mode with ACPI 3.06 and

PSD=ACPI.PSD /APIC /SMP /!NOD

and with IRQs 3 and 5 (I think those are the ones; Pasha refers to 3, 5, 
and 7, but not all of those are available for changing on my mobo) set 
to Reserved in the mobo BIOS.

-=-

Alan Beagley wrote:
> On 02/06/08 08:51 pm Paul wrote:
> 
>> I have now gotten the booting process to go farther, when the /apic 
>> switch is sent to acpi.psd. The system now stops booting just before I

>> would expect the graphic interface to start up.
>>
>> Also, there is no power saving...for instance the screen saver kicks 
>> in, but the monitor does not suspend at any time.
>>
>> Any ideas?
> 
> On my M2N-SLI Deluxe, it works in SMP mode with ACPI 3.06 and
> 
> PSD=ACPI.PSD /APIC /SMP /!NOD
> 
> and with IRQs 3 and 5 (I think those are the ones; Pasha refers to 3, 5, 
> and 7, but not all of those are available for changing on my mobo) set 
> to Reserved in the mobo BIOS.
> 
> -=-
> Alan
Thanks I'll give it a try. I used all of those switches together 
already, but not in the same order, maybe that will make a difference.

I cannot get access to IRQ 3, but I have reserved 5 & 7 already.

I am getting a new error as well, when I start a dos window session or a 
windows window session I am getting an error about not supporting the 

Alan Beagley wrote:
> On 02/06/08 08:51 pm Paul wrote:
> 
>> I have now gotten the booting process to go farther, when the /apic 
>> switch is sent to acpi.psd. The system now stops booting just before I

>> would expect the graphic interface to start up.
>>
>> Also, there is no power saving...for instance the screen saver kicks 
>> in, but the monitor does not suspend at any time.
>>
>> Any ideas?
> 
> On my M2N-SLI Deluxe, it works in SMP mode with ACPI 3.06 and
> 
> PSD=ACPI.PSD /APIC /SMP /!NOD
> 
> and with IRQs 3 and 5 (I think those are the ones; Pasha refers to 3, 5, 
> and 7, but not all of those are available for changing on my mobo) set 
> to Reserved in the mobo BIOS.
> 
> -=-
> Alan
Didn't work. These are the last 3 messages from acpi...the only ones I 
can read

Dummy 2C IDT FFDBF370 Vector F3
Dummy 2F IDT FFDBF370 Vector F2

Registered eComStation users should use the tracker:

(login: guest, password: netlabs) and press "New ticket"
http://svn.netlabs.org/acpi/report/1


collect logs:
http://ru.ecomstation.ru/projects/acpitools/?action=logs