|
| adding new driver |
 |
Sat, 26 Jan 2008 23:31:31 GMT |
When installing rc4 I could not detect my sata drives. Recieved new
dani drivers which now allow me to see the sata drive. Is there a way
I can use the new drivers when I am doing the instal ? I would like to
use the sata as the main drive.
jim dalton
--
|
| Post Reply
|
| Re: adding new driver |
 |
Sun, 27 Jan 2008 11:07:48 GMT |
manually copy the files. or use FileCommander
* DANIS506 1.8.1 or higher
How to update Danis506? Download new Danis506:
*
http://hobbes.nmsu.edu/cgi-bin/h-search?key=danis506&pushbutton=Search
*
http://hobbes.nmsu.edu/cgi-bin/h-search?key=daniatapi&pushbutton=Search
Copy danis506.add and daniatapi.flt to x:\OS2\BOOT
Check CONFIG.SYS, it should load daniatapi.flt (not daniatap.flt)
|
| Post Reply
|
| Re: adding new driver |
 |
Sun, 27 Jan 2008 20:47:33 -050 |
On 01/26/08 06:31 pm James Dalton wrote:
> When installing rc4 I could not detect my sata drives. Recieved new
> dani drivers which now allow me to see the sata drive. Is there a way
> I can use the new drivers when I am doing the instal ? I would like to
> use the sata as the main drive.
What SATA controller do you have, and what are the BIOS settings? RC3
and RC4 installed just fine to a machine with SATA drive connected to
Asus M2N-SLI Deluxe motherboard (nVidia nForce5 chipset).
-=-
|
| Post Reply
|
| Re: adding new driver |
 |
Sun, 27 Jan 2008 20:50:54 GMT |
Yes, you can specify it in the eCS installer CD pre-boot menu. You
have to have some kind of floppy support to do it.
Neil
On Sat, 26 Jan 2008 23:31:31 UTC, James Dalton wrote:
> When installing rc4 I could not detect my sata drives. Recieved new
> dani drivers which now allow me to see the sata drive. Is there a way
> I can use the new drivers when I am doing the instal ? I would like to
> use the sata as the main drive.
>
> jim dalton
--
Expert Consulting for OS/2 and eComStation
|
| Post Reply
|
| Re: adding new driver |
 |
Mon, 28 Jan 2008 01:28:16 GMT |
This is what I have done to get the sata to work. But I want to
remove the regular hard drive and only use sata. To do this I need the
drivers to be on the instal disk or have a way to use the new drivers
instead of the ones on the instal disk.
jim dalton
On Sun, 27 Jan 2008 11:07:48 UTC, eugenegorbunoff@mail.ruDESPAM
(Eugene Gorbunoff) wrote:
>
> manually copy the files. or use FileCommander
>
> * DANIS506 1.8.1 or higher
> How to update Danis506? Download new Danis506:
> *
> http://hobbes.nmsu.edu/cgi-bin/h-search?key=danis506&pushbutton=Search
> *
>
http://hobbes.nmsu.edu/cgi-bin/h-search?key=daniatapi&pushbutton=Search
> Copy danis506.add and daniatapi.flt to x:\OS2\BOOT
> Check CONFIG.SYS, it should load daniatapi.flt (not daniatap.flt)
>
>
--
|
| Post Reply
|
|
|
|
|
|
|
|
|
|