|
| eCS 2.0 rc 4 traps on resume |
 |
Sun, 03 Feb 2008 16:10:59 GMT |
I put eCS 2.0 rc 4 on a Thinkpad T30. I disabled ACPI, and installed
APM.
The notebook suspends nicely, but when it starts to resume, it gets a
Trap E in os2krnl.
I tried disabling sound drivers, but that did not stop the trap.
How can I enable suspend/resume? It worked in eCS 1.2R.
--
Expert Consulting for OS/2 and eComStation
|
| Post Reply
|
| Re: eCS 2.0 rc 4 traps on resume |
 |
Thu, 07 Feb 2008 22:20:58 +100 |
Neil Waldhauer wrote:
> I put eCS 2.0 rc 4 on a Thinkpad T30. I disabled ACPI, and installed
> APM.
>
> The notebook suspends nicely, but when it starts to resume, it gets a
> Trap E in os2krnl.
>
> I tried disabling sound drivers, but that did not stop the trap.
>
> How can I enable suspend/resume? It worked in eCS 1.2R.
I have a T30 and using APM it suspends and resumes okay. I am using
latest apm 10.162 drivers. I have disabled parallel and serial ports.
|
| Post Reply
|
| Re: eCS 2.0 rc 4 traps on resume |
 |
Sat, 23 Feb 2008 16:01:03 GMT |
On Thu, 7 Feb 2008 12:20:58 UTC, David Shearer <user@example.net>
wrote:
> Neil Waldhauer wrote:
> > I put eCS 2.0 rc 4 on a Thinkpad T30. I disabled ACPI, and installed
> > APM.
> >
> > The notebook suspends nicely, but when it starts to resume, it gets a
> > Trap E in os2krnl.
> >
> > I tried disabling sound drivers, but that did not stop the trap.
> >
> > How can I enable suspend/resume? It worked in eCS 1.2R.
> I have a T30 and using APM it suspends and resumes okay. I am using
> latest apm 10.162 drivers. I have disabled parallel and serial ports.
>
> David
When eCS 2.0 boot CD starts with default parameters, ACPI is enabled.
The T30 works just fine with ACPI, but the APM install program does
not. I found that by running Selective Install, I could install APM
support (10.162 is on the eCS 2.0 CD) and after a reboot,
suspend/resume is working on my T30.
--
Expert Consulting for OS/2 and eComStation
|
| Post Reply
|
|
|
|
|
|
|
|
|
|