Hello,
Installation of eCS 2.00 RC3 now shooting for me......a lot of work.
Remarks :
1. No "Toolbar" <WP_LAUNCHPAD> appears in the object after
installation
2. VDM is declared DOS= LOW, NOUMB (stupid)
3. I prefer work with Mozilla & I don't like activation window to write
the password to stop the Lockup.
4. I like the automatic detection of USB material and the automatic
power off after shutdown.
5. VDM hang up in Dos session (windows). But I have resolved with
- CPU/2 Version 1.10 for IBM OS/2 Warp Copyright (C) by Roman Stangl
1998,
2000
and with
- RUN-OS/2 v1.10: Runs OS/2 programs from DOS sessions (c) 1993, Dr.
A.
Olowofoyeku,
You can make like that without a big critical aplication in natif OS/2
in backgrounf :
content of XXX.BAT ====>
@echo off
H:
RUN.EXE CPU.EXE /Offline 2
c:
cd \xxx
vdmprogram.exe
H:
RUN.EXE CPU.EXE /Online 2
6. Know I want find an another graphic card to put on mine PCI express 16.
7. I hope that the following text can help anyone and give him courage :
We have in \ecs\bin a lot of tools to help us.
7.1.Hardware :
Mother Board Asustek P5L-MX
Bios American Megatrends 1004 (6/5/07)
CPU Intel Core 2 Duo E4500 2,20 Ghz
Memory 2 gigas
-realtek 8139/8130/810x fast ethernet adapter because the integrated
chip
Attansic L1 Gigabit Lan Controler is not regonized ( wait & see
Hobbes
Archives)
-ava-2910 (Aic-7850P) fast/wide SCSI II with Microtek Scanmaker X6
attached
but not recognized par TAME. ( b2t6l0)
-epm: D:\cdrecord >cdrecord -scanbus
Cdrecord 2.0 (i386-pc-os2_emx) Copyright (C) 1995-2002 J÷rg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) 'SONY ' 'CD-RW CRX300E ' 'KYS1' Removable CD-ROM
scsibus1:
1,0,0 100) *
1,1,0 101) 'MITSUMI ' 'DW-7802TE ' '1.00' Removable CD-ROM
scsibus2:
2,5,0 205) *
2,6,0 206) * ' 'Scanner 636A4 ' '1.60' Scanner
- HP deskjet 9650 on // port and HPdeskjet 920C on usbprinter.
- 1 memory stick Extrememory usb 2.00 256 mg
- 1 Olympus digital camera C-150
- No Sound because the integrated chip ADI1986A is not recognize (
wait and see
Mensys Subscription ) and the Realtek Lan take the place of my
SBLive (just 2 PCI Slot that is idiot !!!)
- Faxwork on Com1 with Olitec SpeedCom
- Nothing on PCI X16 because my ATI 2400 PRO is not recognized
- Snap Graphics : Samsung SyncMaster 1600 x 1200 16 M 85 hz DPMS
with Chip Intel i945G (in fact 950 ) memory 7872 KB driver 31/07/06
- epm: P:\OS2\APPS >type p:\ibms506$.log
R1.8.1a /VLL /A:0 /U:0 /IT:15
Daniela's Bus Master IDE Driver for OS/2 Version 1.8.1a
Controller:0 Port:01F0 IRQ:0E Status:OK BusMaster Scatter/Gather
Intel ICH7 PATA host (8086:27C0 rev:01) on PCI 0:31.2#0
Unit:0 Status:OK SMS:16 LBA BusMaster UltraDMA5/PIO4 BPB
Model:MAXTOR STM3160812A 3.AAK
Unit:1 Status:OK ATAPI BusMaster UltraDMA2/PIO4
Model:SONY CD-RW CRX300E KYS1
Controller:1 Port:E000 IRQ:10 Status:OK BusMaster Scatter/Gather
JMicron JMB361 PATA host (197B:2361 rev:02) on PCI 2:0.0#1
Unit:0 Status:OK ATAPI BusMaster UltraDMA2/PIO4
Model:MITSUMI DW-7802TE 1.00
7.2. Before booting CD install :
- Setup Bios :
onboard serial port 1 ==> IRQ4 I/O 3F8
parallel port ===> IRQ7 I/O 378 mode EPP
ACPI suspend to Ram ==> S1
ACPI2 support = Yes
all IRQ PCI < 16 non reserved
7.3. Choice of installation : HPFS, no migration, Danis506.add with
compatible mode & without /FORCEGBM etc. of the second line.
No for the second controler ( ava-2910 (Aic-7850P) fast/wide SCSI II)
7.4. Phase 3 : it should be preferable to omit the /SMP at this times of
installation. Just for see the desktop and the content of
Screen folder ( SnapGraphics ), the states and occupation
of IRQ & port adresses.(rmview /irq,acpiirq 1, acpitree,
Hardware Manager folder, sysinfo.exe).
And takes the times to compare with the another system.
In my case I had reserved to much IRQ and
I discover a conflict with my SCSI card (Aic-7850P)======>
in ACPI.CFG I correct with REMAP 0X15 to OXOB.
Now activation de PSD=ACPI.PSD /SMP /APIC /S (NB.: acpi
3.04)
Control the acpidaemon.log, popuplog.os2 & log0001.dat
It's OK now activation of ACPIWZRD.EXE ==> enable APM 1.19
support and install Kernel SMP IBM:14.104a
'--------------------------- eof------------------------------
|