|
| cannot display to viewsonic projector |
 |
Wed, 16 Apr 2008 14:05:01 GMT |
Good day,
Running SUSE 10.3 into TOSHIBA SATELLITE A135. Display ATI RADEON XPRESS
200M Series. At the boot i can project into two display, Notebook and
Viewsonic project, but into login display Viewsonic disapear. I try second
display with VESA 800x600 to use Viewsonic project but with any results.
What it's wrong?
|
| Post Reply
|
| Re: cannot display to viewsonic projector |
 |
Wed, 16 Apr 2008 14:21:43 GMT |
Juan Mera wrote:
> Good day,
>
> Running SUSE 10.3 into TOSHIBA SATELLITE A135. Display ATI RADEON XPRESS
> 200M Series. At the boot i can project into two display, Notebook and
> Viewsonic project, but into login display Viewsonic disapear. I try second
> display with VESA 800x600 to use Viewsonic project but with any results.
>
> What it's wrong?
I have a Toshiba L40 156 and have used this successfully with a Panasonic
Projector. Before connecting the projector I used YaST to change my laptop
screen resolution to 1024 X 768 which is what the projector used. The
projector then worked perfectly. I suggest that you set your Toshiba screen
resolution to a value that the projector likes. The refresh rate may be
|
| Post Reply
|
| Re: cannot display to viewsonic projector |
 |
Wed, 16 Apr 2008 14:32:31 GMT |
John Kilgour a écrit :
> resolution to a value that the projector likes. The refresh rate may be
> significant too. Good Luck.
there are often bios setup to have dual screen, and there *is* a
YaST/Sax2 setup for this
jdd
--
http://www.dodin.net
http://clairedodin.voices.com/
http://www.clairedodin.com/
|
| Post Reply
|
|
|
|
|
|
|
|
|
|